Press Release Banner

August 16, 2002 - LLTEK creates new Rieger A4 (B5) RS4 Super Low Pricing

Rieger - Looking Good!Rieger - cool, calm and collected - V2Rieger - V1 A4 B5 valence
click on an image for an enlarged version

In an effort to reduce prices to lower than some gray market importers of similar Rieger products, LLTEK has devised 6 new and exciting marketing programs for the Audi A4 years 1996-2001.

All of these new 6 inducements will drive Rieger RS4 purchase prices lower than gray market products. As LLTEK is the exclusive importer for Rieger Tuning's Audi product line-up, it goes without saying that LLTEK understands the Audi product line-up better than anyone else. Furthermore only LLTEK has access to the two North American variations of Rieger's lower rear valence. These two models of the lower valence have been modified by LLTEK and Rieger Tuning so that they correctly fit the North American specification A4 car. Gray market importers only have access to the European lower rear valence and these products do not fit correctly and are too small for the North American Audi A4 cars. In other words only LLTEK offers the correct North American spec rear valence.


Shipping
Our gray market competitors ship their front RS4 unboxed and poorly wrapped in light protective plastic. LLTEK uses a custom box and special wrapping, and ships a kit of four pieces (to major city centers) for $177 or an average of $44 per piece. And, more good news! If you order the RS rear spoiler, roof spoiler or other similar accessories at the same time, they can easily fit in the same box and these parts ship for free.


Paint
When you order your parts pre-painted by LLTEK, you get great, German, highest quality paint. This allows you to save even more money, time and aggravation. Now that you can have your 8-piece painted vinyl molding kit as part of the paint bundle you save even more. When you order a 4-piece kit painted, there is even a further discount to save you more and drive your RS4 purchase cost lower.


Mesh
Only LLTEK provides RS4 look alike large mesh. With our new painted package kit program, this mesh is prepainted with special anti-chip black paint. It is then formed on a special press and finally glued into place. Each grill set takes one super large tube of urethane waterproof glue to adhere it properly and securely. Believe LLTEK when we say that this saves you a lot of money.


Foglight version/non foglight version
LLTEK offers both versions of the RS4 front bumper at the same price and, unlike our gray market competitors, LLTEK does not charge extra for the foglight bezels. You pay one low price only, no matter which RS4 model you choose.


Conclusion
If you want the Rieger Tuning RS4 front bumper or a complete RS4 kit, painted or unpainted, LLTEK is the only place to go. LLTEK saves you time, money and aggravation. And, remember, the LAPP program is always working for you to further reduce your costs.


We almost forgot.....
One of the best options is to order the HID driving lights in the left and right corners. This fabulous lighting kit is major-league powerful. When this part is ordered, LLTEK will pre-install it free. Included with the kit are 2 HID bulbs and a ballast/igniter. A relay and fuse set and a remote receiver are pre-wired ready for connection. You also receive a remote control emitter to turn the headlamps on and off. There is no need to run wires to the driving compartment. Price $777.

Price Comparison Single Bumper
Single bumper   Gray Market purchase   LLTEK purchase
RS4 front bumper - no fog   $545  -
RS4 front bumper with fog and extra charge for bezel   $573 + $28=$601  -
RS4 front bumper with or without fog including bezel*   -   $577
Large RS4 mesh - free    - $44
Effective cost from LLTEK     $533
*Note: For a limited time period, LLTEK with include at no extra cost the large RS4 front mesh, a purchase value of $44, further reducing the RS4 effective bumper cost to $(you still pay $577 but the mesh is free), and remember, you can also earn 577 LAPP points for future use and credit.


Price Comparison Unpainted Kit
Kit (4 or more pieces) Unpainted  Gray Market purchase   LLTEK purchase
RS4 front bumper - no fog   $545  -
RS4 front bumper with no fog or bezel   $573 + $28=$601  -
RS4 front bumper with or without fog including bezel   -   $577
Side Skirts V1*  $362   $354
Rear valence V1**  $217¹   $444²
Total cost  $1,124 or $1,180   $1,375³
Total cost if you substitute the correct rear valence supplied by LLTEK at $444   $1,351 or $1,407  
* Side Skirts V2 can be substituted at a slight additional cost.
**Rear valence V2 can be substituted at no additional cost.
¹ Euro version - poor fit.    ²USA version - correct fit
³Note: LLTEK will include at no extra cost the RS4 large front mesh of 3 pieces and RS4 large rear mesh, 2 or 3 pieces, plus the 8 piece vinyl molding kit. Each of these 3 items sells for $44 ($44 x 3=$132). This extra savings reduces your effective cost from $1,375 (less $132) to $1,243. Furthermore, the cost for the Rieger RS rear spoiler is $573 from gray market companies while LLTEK will supply the product for $444, a further savings of $129 should you choose this item.


Price Schedule Painted Kit
Kit (4 or more pieces) Painted   LLTEK purchase
Front RS4 Bumper Paint Cost  $177
Side Skirt Left  $88
Side Skirt Right   $88
Rear valence   $144
Front mesh paint plus installation of 3 formed pieces   $66
Rear mesh paint plus installation of 2 or 3 formed pieces   $66
8 piece molding kit painted   $66
Total price for paint   $695
Special discount for paint when purchasing a kit   $145
Total cost to paint your kit  $550
Plus you receive 550 more LAPP points  


Summary Pricing
Part # Description Price
RIEB5RS4KITU A4/S4 B5 4 pc 1254 body kit - unpainted $1,375
RIEB5RS4KITP A4/S4 B5 4 pc 1254 body Kit - painted $1,925


Shipping

LLTEK can save your further money when you purchase any 4 piece (or more) kits. LLTEK uses its own special protective heavy-duty box to ship each kit. The price is $177 providing the destination is to a major metropolitan area. (Rural delivery is somewhat higher.) Therefore a 4 piece kit costs $177 ÷ 4=$44.25 per component. If you choose to include other components such as the RS wing, they ride in the box free, further reducing your shipping cost. Of course, the large mesh for the front and rear ride free as does the 8 piece vinyl molding kit.

Again, you will earn 1,243 LAPP points for a basic kit, entitling you to further discounts as you work with LLTEK.

Before you order from a gray market competitor, check it out with LLTEK.

At LLTEK we know that the "pole position" in competitive racing is no guarantee of anything - competition is a very fluid event. All prices subject to change without notice.


Click and View Rieger A4 B5 Line  Rieger Tuning Logo

Click and View List of ALL Press Releases   Click and View Entire List of Press Releases

Click and Return to LLTeK Home Page  Click and Return Home